In my opinion, now the portable audio with a wide variety and the most cost happens in the market, one the best is Zoom H4n, but when I bought them late last year, it was discovered that there are limitations.
I have created some uneasiness was recorded by a microphone into the input 1 and 2 in the bottom of the machine, it can not split gain (acceleration signal) of each device. Gain-sharing is required, for example, that if someone speaks mic1 lighter mic2 can not use only gain the necessary mic1 up to the mic2 together.
When I purchased the Zoom H4n, the system software (firmware) version 1.5 and later, it is the Zoom out until the latest update to the v1.72 by a significant increase is that we can split gain of input1 and input2 by separate and independent, and it is grace ... appreciate it.
I was talking about the update system software. Actually it is very easy. Let them see a good step.
1. To download Zoom H4n system software version 1.72 (latest as of now) from this link http://www.zoom.co.jp/downloads/h4n/software/?lang=en.
2. Then extract the zip file and get a file named SYSTEM.BIN.
3. Connecting a Zoom H4n to a computer with a USB device, select the Storage mode (if it not found the USB cable, remove the SD card from your H4n to connect directly to it at all).
4. Throw a SYSTEM.BIN file into the root directory of the SD card of the Zoom H4n ... cast into thinking it is not anywhere to put it into the folder.
5. Disconnect the USB cable of the Zoom H4n to a computer. Or bring the SD card that came with the computer directly to the SD card I put back into the H4n as it was.
6. Turn on the Zoom H4n, press [PLAY / PAUSE] Now hold on.
7. Use the rotate [DIAL] to the side of the H4n to move the cursor down to "OK".
8. Rotate the [DIAL] to begin the update.
This is done to update the system software version 1.72.
0 comments:
Post a Comment